![]() ![]() The label colors are more subdued than the TM-2030: beige and black. TM-2030 RV version is a little less wide than the TM-2030A and has surface mounted enclosure. Flush mount or use wiremold box to mount. The positive lead to the TriMetric should be fused with a 1-amp fuse. Phone: 360.738.8230 - Fax: 360.734.4195 Customer Service: Toll Free 800.222. ![]() ![]() Allows for a maximum battery bank size of 2500 amp-hours. Does NOT monitor more that 1 battery bank Supply voltage 8V to 16V DC. The 1000A/100mV shunt has the same resistance as the 500A/50mV shunt and may be used interchangeably. Compact surface mount display, 125x 62x 23mm, in Grey Monitors 12v lead acid. Use a 1000-amp 100mV shunt for systems with stacked XW inverters or where continuous current is over 300 amps. Use the 500-amp shunt if you have a 12V inverter larger than 800 watts or a 24V inverter larger than 1600 watts. The TriMetric can be located hundreds of feet away from batteries using inexpensive 4-conductor twisted-pair meter wire. It also records min and max voltage, days since batteries were last charged, days since equalized, and total lifetime amp-hours withdrawn from the batteries. Another LED flashes when batteries should be recharged, equalized, and during low battery voltage. Amp-hours can be displayed in actual amp-hour numbers or as "% full." An LED lights when the battery is charging and flashes when the battery has been fully charged. It reads volts, amps and amp-hours on an LED display. Surface Mount Box for Battery Monitor - Fits Renogy, Aili, QWORK, TF03K, LNEX Brand: LB3D Designs 3 ratings 1999 Fits Renogy, Aili, QWORK, LNEX and TF03K Battery Meters No Visible Mounting Hot Glue, Velcro, or Screw Mounting Designed and Made in the USA Inside Dimensions: 94.5mm X 56.8mm by 2.95mm deep (recessed face). This updated version of the 2025 amp-hour meter operates on 12, 24 or 48 volts. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |